MoonBoard T-Nut Kit - US Standard
A pack of 50 metric US Standard 3/8" t-nuts for use if you are building your own MoonBoard panels. The t-nuts are made from zinc plated carbon steel and are compatible with US Standard 3/8" bolts.
Each T-nut requires 2 small mounting screws to stop the T-nut from spinning or falling out of the back of the MoonBoard panels. The screw diameter needs to be no bigger than 3.5mm and the screw length no longer than 16mm.
- 50 t-nuts
- Zinc plated carbon steel
- US Standard 3/8"
- Drill diameter required for fixing the t-nut is 1/2 Inch"
- Barrel length 0.393"or 10mm